Pump System PuraLev®-600MU.7 (ATEX/IECEx, Stand-Alone Model)
Consists of:
- Motor LPM-600.5 (ATEX)
- Controller LPC-600.1-02 (Stand-Alone Model)
- Multi-Use Pump Head LPP-600.18 (no drain port)
Specifications
| Max. Flow (l/min) | 75 |
|---|---|
| Max. diff. Pressure (bar) | 3.2 |
| Max. Viscosity | 50 cP |
| Fitting Size | 1" |
| Fitting Type | Triclamp |
| Pump Head Material | PVDF |
| Impeller Material | PFA |
| Sterilization Methods | Autoclaving, CIP, SIP |
| Wet Volume (without drain port) | 113 ml |
| Wet Surface (without drain port) | 363 cm² |
| Max. Liquid Temperature | 90°C / 194°F |
| Motor/Driver Coating | ETFE |
| Direct Connection to Controller | Yes |
| Connector Type | 2x circular (M23, IP-67) |
| Cable Lenght (mm) | 3 000 |
| Cable Jacket | FEP |
| Ex Protection | ATEX/IECEx |
| Power | 600 W |
| Voltage | 48 VDC |
| PLC Interface | 1x analog input (“Speed”) 4 - 20 mA 1x digital input (“Enable”) 0 - 24 V (optocoupler) 1x digital output (“Status”) 0 - 24 V (relais) |
| Service/Control Interface | Button Control Mode |
| IP Rating | 67 |
Downloads
System Configuration