Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-90955
PuraLev® Driver System PLD-i30SU.1 (OEM Model)
Consists of:
Availability on request
Max. Flow (l/min)
7.7
Max. diff. Pressure (bar)
1
Max. Viscosity
40 cP
Max. Liquid Temperature
60°C / 140°F
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
| Max. Flow (l/min) | 7.7 |
|---|---|
| Max. diff. Pressure (bar) | 1 |
| Max. Viscosity | 40 cP |
| Mounting Type | Bayonet type with locking pin |
| Sterilization Methods | Gamma radiation up to 40 kGy |
| Fitting Size | 3/8" |
| Fitting Type | Barb |
| Pump Head Material | Polypropylene |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Screws | 4 pcs M3 x 6 mm (Stainless Steel) |
| Wet Volume (without drain port) | 7.7 ml |
| Wet Surface (without drain port) | 55.9 cm² |
| Max. Liquid Temperature | 60°C / 140°F |
| Motor/Driver Coating | Epoxy |
| Connector Type | Open Wires |
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | PVC |
| Ex Protection | Other |
| Power | 35 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog output 0 - 10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
| Housing/Material | Polypropylene |
Downloads
System Configuration
