Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91472
Pump System BPS-2000.59 (ATEX/IECEx, High Pressure)
Consists of:
- Motor LPM-2000.15 (ATEX)
- Controller LPC-2000.2-12 (High Pressure)
- Pump Head LPP-2000.20 - High Pressure
Availability on request
Max. Flow (l/min)
80
Max. diff. Pressure (bar)
6.2
Max. Viscosity
20 cP
Max. Liquid Temperature
90°C / 194°F
Service/Control Interface
USB and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.
The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.
Specifications
| Max. Flow (l/min) | 80 |
|---|---|
| Max. diff. Pressure (bar) | 6.2 |
| Max. Viscosity | 20 cP |
| Fitting Size | 1" |
| Fitting Type | VCR |
| Pump Head Material | Stainless Steel |
| Impeller Material | Stainless Steel |
| Sealing Ring | Unfilled FFPM |
| Wet Volume (without drain port) | ~ 268 ml |
| Wet Surface (without drain port) | ~ 62 300 mm² |
| Max. Liquid Temperature | 90°C / 194°F |
| Motor/Driver Coating | ETFE |
| Direct Connection to Controller | Yes |
| Connector Type | 2x circular (M23, IP67) |
| Cable Lenght (mm) | 3 000 |
| Cable Jacket | FEP |
| Ex Protection | ATEX/IECEx |
| Power | 2 000 W |
| Voltage | 200-240 VAC |
| PLC Interface | 2 analog outputs 0-5 V 4 analog inputs 2 with 4-20 mA, 2 with 0-10 V 4 digital inputs 0-24 V (optocoupler) 4 digital outputs 0-24 V (relays) |
| Service/Control Interface | USB and PLC Interface |
Downloads
System Configuration
