Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-90521
Pump Head LPP-200.3 (High Viscosity)
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2.6
Max. Viscosity
50 cP
Max. Liquid Temperature
90°C / 194°F
The standard impeller and pump casing are both fabricated from chemical resistant high purity fluorocarbon resins. Together with the rotor magnet they make up the pump head. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact free, inside a sealed casing and is driven by the magnetic field of the motor.
Specifications
| Max. Flow (l/min) | 21 |
|---|---|
| Max. diff. Pressure (bar) | 2.6 |
| Max. Viscosity | 50 cP |
| Fitting Size | 1/2” |
| Fitting Type | Pillar Super 300 |
| Pump Head Material | PTFE |
| Impeller Material | PFA |
| Sealing Ring | Kalrez perfluoroelastomer |
| Wet Volume (without drain port) | ~26.5 ml |
| Wet Surface (without drain port) | ~13 900 mm² |
| Max. Liquid Temperature | 90°C / 194°F |
