Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-90708
Pump Head LPP-200.7
Availability on request
Max. Flow (l/min)
20
Max. diff. Pressure (bar)
2
Max. Viscosity
20 cP
Fitting Size
1/2”
Max. Liquid Temperature
70°C / 158°F
The standard impeller and pump casing are both fabricated from chemical resistant high purity fluorocarbon resins. Together with the rotor magnet they make up the pump head. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact free, inside a sealed casing and is driven by the magnetic field of the motor.
Specifications
| Max. Flow (l/min) | 20 |
|---|---|
| Max. diff. Pressure (bar) | 2 |
| Max. Viscosity | 20 cP |
| Fitting Size | 1/2” |
| Fitting Type | Tube |
| Pump Head Material | PFA |
| Impeller Material | PFA |
| Sealing Ring | FFPM perfluoroelastomer |
| Wet Volume (without drain port) | ~29 ml |
| Wet Surface (without drain port) | ~16 600 mm² |
| Max. Liquid Temperature | 70°C / 158°F |
