Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91213
Pump Head LPP-30.3 (High Pressure)
Availability on request
Max. Flow (l/min)
3.8
Max. diff. Pressure (bar)
2.8
Max. Viscosity
10 cP
Fitting Size
3/8"
Max. Liquid Temperature
70°C / 158°F
The standard impeller and pump casing are both fabricated from chemical resistant high purity fluorocarbon resins. Together with the rotor magnet they make up the pump head. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact free, inside a sealed casing and is driven by the magnetic field of the motor.
Specifications
| Max. Flow (l/min) | 3.8 |
|---|---|
| Max. diff. Pressure (bar) | 2.8 |
| Max. Viscosity | 10 cP |
| Fitting Size | 3/8" |
| Fitting Type | Pillar Super 300 |
| Pump Head Material | PTFE |
| Impeller Material | PTFE |
| Sealing Ring | FFPM perfluoroelastomer |
| Wet Volume (without drain port) | ~6.5 ml |
| Wet Surface (without drain port) | ~5 620 mm² |
| Max. Liquid Temperature | 70°C / 158°F |
